Automatic self-cleaning filters, backwashable strainers from BOLL

Automatic filters have a self-cleaning mechanism that periodically flushes out accumulated debris to prevent clogging. Backwashable strainers from BOLLFILTER allow continuous operation and are suitable for systems where manual cleaning is inconvenient. They can be used as connected filters.

Looking for an automatic backwash filter that fits your specific needs?
We have a wide range of automatic filters to choose from, depending on your flow rate, grade of filtration, and type of fluid.

aquaBoll® self-cleaning water filter
Backwashable strainer with adaptive filter elements »

Flange Connection: DN 50 to DN 100/ 40"
Filter element: Fine sieve cylinder element Filter candle element Sieve cylinder element
Grade of filtration: 10 µm - 5 mm

engineBoll Automatic filter
For lube oil and fuel oil filtration »

Flange Connection: DN 50 to DN 300
Filter element: Muliti-Segment
Grade of filtration: 1µm - 50µm

aquaBoll BWT
Ballast water filter »

Flange Connection: DN 80 - DN 350 / 3" - 14"
Note: Automatic self-cleaning pre-filtration of sea-water, for the protection of ballast water treatment systems
Filter element: Bronze basket with super duplex

BOLLFILTER Automatic Type 6.03 AOT
The 2-in-1 solution for water filtration, backwashable and with UV disinfection »

Flange Connection: DN 40 / 1 ½"
Filter element: Slotted and mesh candles
Grade of filtration: Nominal filtration grade: 50 - 100 µm

BOLLFILTER Automatic Type 6.04
Automatic backflushing filter, self-cleaning strainer for water and coolant »

Flange Connection: FNPT DN 40 / 1 ½"
Filter element: Screw-in candles (stainless steel)
Grade of filtration: 10 µm – 500 µm

BOLLFILTER Automatic Type 6.18
Welded backwashing filter, self-cleaning strainer for water »

Flange Connection: DN 500 - DN 1000 / 20" - 40"
Filter element: wedge wire, longitudinal wedge wire candle or wire-mesh candle with smooth surface
Grade of filtration: 10 µm - 5 mm (depending on the size of the filter)

BOLLFILTER Automatic Type 6.21/6.22
Backflushing filter for fuel oil for small volumes »

Flange Connection: DN 50 (optional with Adapter to DN 32 / 1 1/4") / 2"
Filter element: Multi-Segment
Grade of filtration: optional 10 µm, 25 µm, 34 µm or 48 µm

BOLLFILTER Automatic Type 6.48/ 6.46
Efficient continuous backflushing filter for lube oil »

Flange Connection: DN 40 - DN 300 / 1 1/2" - 12"
Filter element: wire-mesh candles
Grade of filtration: 10 µm to 48 µm

BOLLFILTER Automatic Type 6.64
Self-cleaning filter for the maritime industry »

Flange Connection: DIN Only DN 100 - DN 400 (Approx. 4" - 16")
Filter element: wire-mesh and star pleated candles (made of stainless steel with smooth surface)
Grade of filtration: 6 µm - 50 µm

BOLLFILTER Automatic Type 6.64 KSS
Backflushing filter for coolants »

Flange Connection: DN 100 to DN 400 / 4" to 18"
Filter element: wire-mesh candles (optional made of stainless steel with smooth surface)
Grade of filtration: 6 µm - 150 µm

BOLLFILTER Automatic Type 6.72
Standard fuel oil automatic self-cleaning filter »

Flange Connection: DN 40 - DN 80 / 1 ½" - 3"
Filter element: wire-mesh and star pleated candles (made of stainless steel with smooth surface)
Grade of filtration: 6 µm - 200 µm

FILTRATOR Type 8.64/8.72 for CAT fines filtration
CAT fines filtration for low pressure systems »

Flange Connection: DN 65 - DN 150 / 2 ½" - 6"
Filter element: screw-in candles with star-pleated stainless-steel wire mesh
Grade of filtration: 6 µm absolute, 10 µm absolute

Functionality of the self-cleaning filters

Self-cleaning filters operates on the principle of mechanical filtration followed by automated backwashing to remove accumulated particles from the filter element.

Filtration stage

The medium flows through the filter element either from inside to outside or from outside to inside. Here the dirt particles are retained and the cleaned medium reaches the filter outlet. When the differential pressure reaches a certain value, a signal is transmitted from the differential pressure indicator to the control unit, which automatically triggers the backwashing process. The backwashing process may also be initiated by a period of time between flushing, a level in a tank or reservoir connected to the filter or any other convenient parameter.

Backflushing phase

During backflushing, the dirt particles are flushed off of the filtration surface by filtered fluid reversal of flow (own medium or through external flush medium, compressed air or service water).

Would you like to find out more?

Click here to contact us

Advantages of automatic filters

Continuous Operation: One of the key advantages of automatic filters is their ability to perform continuous filtration without the need for manual intervention. The automated backwashing system ensures that the filter remains operational even during periods of heavy contamination, minimizing downtime and optimizing filtration efficiency.

Hard-to Reach Locations: In areas that were previously considered inaccessible or difficult to maintain, automatic filters are an absolute game changer.

Connected filters: The central control system allows operators to monitor the status and performance of all connected filters from a single interface. This improves the operational efficiency, the reliability, and the flexibility of the system.

Reduced Maintenance: By automating the backwashing process, the need for manual cleaning or replacement of the filter element is minimized, reducing maintenance requirements and associated downtime.

Application areas of our backwash filters

We're here to help!

Automatic self-cleaning filters, backwashable strainers from BOLL

aquaBoll® self-cleaning water filter
Backwashable strainer with adaptive filter elements »