BOLLFILTER - Protection Systems

HOME | CONTACT | EVENTS | DOWNLOADS |

Quick-Link

What filter do you want?

Just 3 clicks to your product

Selection of application examples:

Select your field of application

1. Your field of application:

Contact

BOLL & KIRCH Filterbau GmbH
P.O. Box 1420, 50143 Kerpen
Siemensstr. 10-14, D-50170 Kerpen
FON: +49 2273 562-0
FAX: +49 2273 562-223

send us an e-mail


	» Automatic filters » Duplex filters » Simplex filters » Accessories

Automatikfilter
Protect your Investment

The product:
BOLL Filtrator
The type:
8.64.1
The liquid:
Fuel HFO

Basic data:
Nominal diameter: Filter element: Grade of filtration: Pressure stage: Operating temperature: Filter housing: Cleaning mode: Filter heating:	DN 100 - DN 150 Screw-in candles with star-pleated stainless-steel wire mesh 10 µm abs. PN 16 max. 150° C nodular cast iron sequential, reversed flow back-flushing, supported by compressed air steam heating


Description:
The filtrator unit is positioned downstream of the separator so that failures occuring during separation are detected and harmful solids are kept off from the motor. Basically, the filtrator consists of a backflushing filter and a pump unit set up on a base frame. Optionally, the filtrator can be fitted with a water detector (type 8.64.0). Filtration is based on a multi chamber system by means of backflushable mesh candles. Backflushing is performed by pneumatic self-medium flushing. Seperation of the filter chambers effects that filtration and backflushing can run simultaneously and independently from each other. The flowing performance is not decreased.